The problem
Auto-ignition failing on three burners
The repair
Replaced spark modules and installed new ignition kit
The result
Tested all burners and confirmed proper operation
Customer Complaint and Possible Causes
The customer reported that the burner auto-ignition was not working on their stove. This type of issue usually happens due to worn-out igniters, bad spark modules, or loose wiring connections.
Diagnosis and Findings
We checked all the burners and found that three out of five lacked auto-ignition because the spark modules failed and the igniters were physically damaged.
Repair Performed
We replaced the three non-working spark modules and installed a new ignition kit on all five burners.
Verification and Outcome
We tested all burners after finishing the repair and confirmed that everything operated properly with no faults found.
Let's take care of your appliance.
Experiencing a similar problem? Tell us what needs attention.